TIGOR EV_ZIPTRON_SERVICE MANUAL

SUSPENSION 37 d) Apply pressing load using special tool (part no 2779 5890 3501) ball joint housing collar until collar face butt with mating bush. e) Circlip to be assembled after adequate fitment of ball joint. NOTE: Ball joint assembly type repair-1 having bigger OD to be used while replacement of ball joint first time and repair 2 for second times. Ball Joint Repair Sizes G. REMOVAL AND INSTALLATION OF LOWER ARM RUBBER BUSHES Lower arm front pivot bush  Removal: 1. Remove front pivot bush using special tools as shown in below arrangement. NOTE: Apply soap and water to the bush, the inner surface of the tool and the bore of assembly lower link before installation.  Installation: 1. Install front pivot arm bush using special tools as shown in below arrangement.