TIGOR EV_ZIPTRON_SERVICE MANUAL

DRIVESHAFT 8 6. Remove the tripot spider assembly from the axle shaft as showing below figure. If required tab the spider assembly gently using a nylon mallet. 7. Clean the following items thoroughly with cleaning solvent. Remove all traces of old grease and any contaminates. A. Tripot balls B. Needle rollers C. Housing 8. Dry all the parts. Inspect these parts for damage or wear. (If any of the parts are damaged, the entire sub- assembly along with the outer housing needs to be replaced.) 9. After this remove the rubber boot from the axle shaft.