TIGOR EV SERVICE MANUAL

LV ELECTRICAL 20 4. Disconnect electrical connection to the tail lamp. 5. Remove the tail lamp assy. REFITMENT: 1. Position Tail lamp to its proper place. 2. Push the lamp at catcher points to sliding direction x axis to lock with Trim Clip on BSO & simultaneously catcher on BSO. 3. Tight the both nuts 4. Connect Tail lamp connection. 5. Close the Tailgate. REMOVAL OF TAILLAMP & BULBS 1. Open Tailgate & ensure all lamps in OFF condition. 2. Disconnect Tail Lamp Connector. 3. Remove the two nut mounting fastener. 4. Pull the lamp at catcher points to release from BIW & take lamp out from vehicle. 5. Rotate the turn signal bulb holder in anti-clock wise direction to unlock the bulb holder from lamp. 6. Remove the bulb holder from lamp. 5. Remove/replace the bulb. 6. Rotate the bulb holder in clockwise to lock the bulb holder on lamp REFITMENT – 1. Position Tail lamp to its proper place. 2. Push the lamp at catcher points to sliding direction x axis to lock with Trim Clip on BSO & simultaneously catcher on BSO. 3. Tight the both nuts 4. Connect Tail lamp connection. 5. Close the Tailgate