TIGOR EV SERVICE MANUAL

BODY 23 2.9 FRONT DOOR REMOVAL 1. Remove electrical connection of door wiring harness. 2. Remove the check strap. NOTE Before fitting the check strap apply grease on it. Grease type (Maker, Type): KLUBER, POLYLUB 801. Regreasing interval: 6 Months or 10,000km within. 3. Support the door from the below and remove four mounting bolt from door side. 4. Slowly pull out the door and pull out the wiring harness carefully which was disconnected earlier. FITMENT For fitment follow the reverse procedure of removal.