TIGOR EV SERVICE MANUAL

HV ELECTRICAL 16 Open the driver door and see instrument cluster to know SOC, time to charge. During charging, temperature of battery increases then battery cooling operation will start automatically. When vehicle is charged 100% SOC, press stop button on the station and dock back the fast charging cable back to station. To stop the charging, switch off DC charging station. Unlock and pull out the charging gun. Put on the protective caps on both Charging Gun and Vehicle Inlet. Action to be taken when charging stops abruptly:  Check the reason for interruption of charging. (Refer ‘Troubleshooting guide for Normal Charging’ table).  Switch off the AC supply.  Remove the charging gun from the charging inlet.  Wait for 5 minutes.  Restart the charging. (Refer charging procedure). Precautions to be taken while cleaning the charging inlet:  Keep the vehicle lid always closed.  When the lid is open ensure that dust caps are in closed position.  During normal charging, make sure that DC charging cap is closed.  In case of dust/mud accumulation in charging port, it can be cleaned by spraying clean water.  In case of snow accumulation in charging port, it can be cleaned with spraying clean lukewarm water.  Allow the water to drain completely through drain holes.  Allow the charging port to dry completely. NOTE: Water entering into the charging port will always be drained through the drain system. If water is stagnant in charging port area call Tata Motors Authorized service center to rectify the issue.