TIGOR EV SERVICE MANUAL

LV ELECTRICAL 77 10.6. DRIVER INFORMATION SYSTEM Sr. No Driver Information System Image Description 1 Odometer Indicates distance traveled by a vehicle Range : 0 to 999999 Resolution : 1 km The Odometer reading does not over flow to “0” when maximum value is reached, the display will freeze to maximum value. Note: You can change the Distance unit as km or miles ( mi ) using SET and MODE buttons. ‘mi’ is applicable for Export variant only. 2 Trip meter A & B Indicates distance traveled by a vehicle in Trip mode. Range : 0.0 to 9999.9 (5 digits) Resolution : 0.1 km Trip meter reading becomes “0.0” after it crosses 9999.9 km. Note: You can reset Trip meter using SET button. For more information You can change the Distance unit as km or miles ( mi) using SET and MODE buttons. ‘mi’ is applicable for Export variant only. 3 Distance To Empty Indicates approximate distance that your car can travel with available usable battery charge left in the battery & it is displayed in “km”. This value may differ from the actual driving distance available. Notice: If DTE is displayed as ‘---‘ , take your vehicle to authorized TATA MOTORS service station. The distance to empty value is an estimate of the available driving distance. In event of drive with higher power consumption / harsh drive, actual initial DTE shown and kilometer driven will vary than display. 4 Clock Indicates current time in 12 Hrs mode. Note: You can change the clock time using SET and MODE buttons. Whenever the battery terminals or related fuses are is connected you must reset the clock time. This feature is available when ignition switch is in ON position. 5 Service reminder Indicates the number of days or kilometers remaining for next service at every ignition ON for few seconds if service is due. If service is overdue, DIS will display 0 km or 0 days and spanner symbol will blink at every