NEXON EV SERVICE MANUAL

BODY 34 4.19. TAIL GATE LATCH CABLE 1. Open the tail gate. 2. Remove parcel shelf. 3. Remove rear seat backrest (for removal process refer rear seat removal process). 4. Flip the cushion assembly. 5. First remove the carpet on the right hand side of the vehicle so that the cable routing is visible. 6. Disconnect tailgate latch cable from tailgate latch lever. 7. Remove tail gate striker. (For procedure refer tailgate striker removal process.) 8. Disconnect tailgate latch cable from the tailgate striker. 9. Pull out the cable from luggage compartment. FITMENT For fitment follow reverse procedure of removal. 4.20. TAIL GATE TRIM REMOVAL 1. Open the tail gate. 2. Loosen and remove two mounting bolts of tailgate wiper motor cover. 3. Remove tail gate wiper motor cover. 4. Pull out tailgate trim by plastic wedge / fingers and pull out trim gently. NOTE While pulling out the tail gate trim, care should be taken such that tree clips do not get damage. Below image gives location of tree clips on tail gate trim.