NEXON EV SERVICE MANUAL

BODY 13 13. Remove electrical connections of Start stop switch, remove two more screws at Glove Box area of Mid Panel & Pull out dashboard mid panel. 14. Remove lower side & outboard side screws of glow box assembly and pull out glove box 15. Remove PAB Assembly (If applicable). (For procedure refer PAB removal process in SRS section). 16. Remove ‘A’ pillar Lower trim. (For procedure refer ‘A’ pillar trim removal process.) 17. Remove two mounting screw near A pillar.(LH,RH) 18. Before removing mounting bolts of Dashboard Panel need to Remove Display Bezels (Cap & Lower Bezel) & 7” Display. Also disconnect electrical connection of 7” Display unit 19. Before removing mounting bolts of Dashboard Panel need to remove PAB Assembly after removal of Glove Box assembly & disconnect its electrical connection