NEXON EV SERVICE MANUAL

LV ELECTRICAL SYSTEM 75 TELL TALES COLOR INDICATOR REMARKS DRL indication Green This symbol lights up when the ‘IGN’ is turned ‘ON’ and shall go ‘OFF’ after 4 seconds. This symbol comes ON when the Day Time Running lamp is ‘ON’. Key Not Detected (Used in PEPS Vehicles) Amber This symbol lights up when the Valid UID (User Identification Device) is not detected inside the vehicle. Co-Driver Seat belt Indicator Red Seat belt warning indicator comes ‘ON’ for 4 seconds, when ignition is turned ‘ON’ irrespective of seat belt buckle status. If Co-Driver is present & its seat belt is not fastened then Telltale will be ON as initial warning with No audio chime. If seat belt remains unbuckled and vehicle speed goes above 15 kmph, Final Warning will start with audio chime for 90 seconds continuously. Note: • Once the seat belt is fastened, the buzzer and warning indicator will go ‘OFF’. • Seat belt audio alarm remains OFF when reverse gear is engaged. Speed Limit Lamp Amber When Vehicle Speed cross 80 Km/hr then Speed Limit Warning Indicator will turn ON along with one time Chime per 2 Minute (Audible Warning). If Vehicle Speed crosses 120 Km/hr then along with Speed Limit Warning Indicator, Chime will start continuously ON till vehicle speed is above 120 Km/hr. Once Vehicle Speed is reduced below 120 Km/hr but above 80 Km/hr, then Continuous Chime will stop but Speed Limit Warning Indicator will remains ON continuously with one time Chime per 2 Minute (Audible Warning). When Vehicle Speed is reduce below 80 Km/hr, then Speed Limit Warning Indicator along with Chime ( if it On ) will gets turns OFF. Charging Indicator Green This feature provides HV (High voltage) battery charging status to user. A bulb check shall be performed for this TT at every IGN ON for 4 seconds. The TT shall remain ON irrespective of the Input state during these 4 seconds. This tell-tale shall be controlled turned ON/OFF by receiving the charging input signal. This Telltale is ON during charging. Zero Charge/ Low Charge Red This feature provides the HV battery Low/Zero Charge Status to the user. A bulb check shall be performed for this TT at every IGN ON for 4 seconds. The TT shall remain ON irrespective of the Input state during these 4 seconds. This tell-tale shall be controlled turned ON/OFF by receiving the SoC input when the SoC level is low TT will turn ON to indicate charging system battery low to the user. Battery High Temperature Telltale Red This feature provides HV battery high temperature status to user. A bulb check shall be performed for this TT at every IGN ON for 4 seconds. The TT shall remain ON irrespective of the Input state during these 4 seconds. This tell-tale shall be controlled turned ON/OFF by receiving the input HV battery