ALTROZ SERVICE MANUAL

SUSPENSION 27 5. Assemble dust cover on the spring (ensure dust cover is properly located on spring). 6. Assemble bearing on the dust cover. 7. Assemble bearing dust cover on bearing. 8. Assemble top mount on bearing (ensure top mount M8 bolt head should be placed in the bearing slots). 9. Fit Hex sp. Flange nut (1) and tighten to 6-7 Kg- m torque. Hold the piston rod by Allen key (A/F: 6 mm) to stop piston rod rotation during tightening of nut. 10.Remove spring compression tool carefully. 11.Lock the dust cover with striker cap. 9.3 ON VEHICLE WHEEL HUB REMOVAL AND ASSEMBLY REMOVAL 1. Place the vehicle in the two-post lift and apply parking brake. 2. Remove wheel rim cover. 3. Loosen the wheel mounting bolts. 4. Lift the vehicle till the front wheels are off the ground. 5. Unscrew the wheel mounting bolts and remove the wheel. 6. Unscrew and remove tie rod ball joint nut. 7. Remove tie rod ball joint using puller part No. 2702 5890 4602. 8. Support the lower arm from bottom. 9. Apply Brake.