ALTROZ SERVICE MANUAL

TRANSAXLE - TA65 Star 37 19. LAY SHAFT ASSEMBLY: 1. Press cylinder roller bearing on lay shaft by using drift part no. 2702 5809 2603. 2. Fit the circlip. It should snugly fit. NOTE: Circlips are available in different thicknesses. 2.25mm, 2.3mm, 2.35mm, 2.4mm. 3. Place first gear (lay shaft) on lay shaft by keeping dog teeth upward. 4. Install preselected circlip ( Circlip thickness should be so selected that there is no axial play of gear). 5. Place engaging gear (1/2 speed) with circlip races downward and with slot on engaging gear on corresponding lug on synchrocone 6. Place the double synchro pack fitted over the first gear. 7. Place springs (3 nos.) plungers (3nos.) into the hole in engaging gear (1/2 speed). 8. Place sleeve carrier and steel ball on it and slide reverse gear/shifter sleeve (1/2 speed) on it with fork slot in upward position.