ALTROZ SERVICE MANUAL

CLUTCH_PETROL 20 E. CLUTCH ADJUSTMENT PROCEDURE: NOTE: There is no free play in the system and hence no clutch pedal free play adjustment is required. However, for ensuring the proper functioning of the clutch the following procedures should be used. 1. Clutch pedal height should be same as the brake pedal height. Brake pedal height is automatically ensured by protrusion of Booster push rod (refer Brake pedal adjustment from Brake Group). 2. The clutch pedal height from the floor keeps on increasing as the clutch lining wears. 3. Clutch pedal height can be adjusted by setting 4. The nut provided on the clutch release lever. The release lever is located on transaxle housing. Turn the nut by hands so as to get clutch pedal height same as brake pedal height, and cable is sufficiently stretched. Press the clutch pedal 2/3 times and confirm the height. 5. It should be possible to lift the clutch pedal by hand easily without much force. The pedal should have movement of 40 to 50 mm. If pedal lifting force is high, (more than 0.9 kg.) then shift the position of tension spring hook on holes 1, 2 and 3 for reducing tension . NOTE 1. Not to add carpet over the basic carpet in the pedal region, 2. Basic carpet should be held firmly in the pedal region.