ALTROZ SERVICE MANUAL

1.5L REVOTORQ ENGINE 153 13. Apply sealant to the cover as shown. 14. Install the crankshaft oil seal cover. 15. Fit the crankshaft oil seal. SPECIAL TOOL  Drift crankshaft rear cover oil seal -: 2702 5890 06 08 iv. FITMENT OF CYLINDER HEAD ON CYLINDER BLOCK 1. Place the Cylinder Head gasket as shown. NOTE  Ensure that the "TOP" mark on the gasket is facing towards the intake manifold side of the block. Refer ‘Assembly Clearances’ section for selection table.