ALTROZ SERVICE MANUAL

BODY 39 2.26 REAR SEAT BELT REMOVAL 1. Remove parcel shelf. 2. Remove rear seat backrest (for removal process refer rear seat removal process). 3. Remove the rear seat (refer seat removal process.) 4. Remove the bottom mounting fastener & C pillar upper and lower trim. (For procedure refer C pillar removal process. 5. Remove mounting bolt of seat belt striker from both side and take it out. 6. Remove centre seat belt mounting bolts shown in figure. 7. Remove the rear seat belt assembly. FITMENT For fitment follow reverse procedure of removal. 2.27 “A” PILLAR TRIM:  “A” PILLAR UPPER TRIM REMOVAL 1. Remove door beading at A Pillar trim location. 2. Pull A Pillar trim from upper locate 3. Pull A Pillar trim from upper locater. 4. Pull “A” Pillar trim bottom snaps from slots. 5. Remove A pillar trim. FITMENT For fitment follow reverse procedure of removal.  “A” PILLAR LOWER TRIM REMOVAL 1. Remove door beading and Pull lower trim gently. 2. Pull out A Pillar lower trim. FITMENT For fitment follow reverse procedure of removal.