ALTROZ SERVICE MANUAL

BODY 24 6. Insert plastic wedge pin and remove the door trim. NOTE While lifting door trim, care should be taken such that tree clips don’t get damage. Below image gives the location of tree clips on door trim. FITMENT For fitment follow the reverse procedure of removal. NOTE “For Side door Rattling Noise, Door Latch and striker setting need to be done & maintain 1 mm under flush condition.” 2.12 DOOR INNER LOCK HANDLE REMOVAL 1. Remove the door trim. (For procedure refer door trim removal process.) 2. Loosen and remove the mounting screw of inner handle. 3. Remove one snap and two hooks located behind the front door inner handle lever. 4. Slide the Housing in horizontal / X direction towards vehicle front and remove the lever with Housing assembly from Door Inner panel. 5. Disconnect the cable from inner lock handle connecting inner handle to latch assembly. 6. Remove door inner lock handle. FITMENT For fitment follow the reverse procedure of removal.