ALTROZ SERVICE MANUAL

BODY 22 8. Pull out the bumper edges from the wheel arch. 9. Take care that the hood seal is removed for easy removal of bumper. 10.Disconnect the electrical connections. FITMENT For fitment follow the reverse procedure of removal. 2.10 FRONT DOOR REMOVAL 1. Remove electrical connection of door wiring harness. 2. Remove the check strap. NOTE Before fitting the check strap apply grease on it. Grease type (Maker, Type): KLUBER, POLYLUB 801. Regreasing interval: 6 Months or 10,000km within. 3. Door needs to be dismantle by removing below shown bolt (door side only). 4. Slowly pull out the door and pull out the wiring harness carefully which was disconnected earlier.