TIAGO TIGOR BSVI - SERVICE MANUAL

STEERING 14 2.3.6 RACK & PINION ASSEMBLY REMOVAL 1. Remove lower universal joint bolt and make steering rack free from the steering column assembly. 2. Remove both front wheels (Refer wheel removal procedure / Wheels and tyres group). 3. Remove tie rod ball joint nyloc nut. 4. Remove tie rod end by using tie rod ball joint puller. (Part No. 2871 5890 4601). NOTE: Steering arm should not be hammered for removal of tie rod outer ball joints as this may lead to damage of steering arm part. 5. Follow steps (3) and (4) to remove tie rod ball joint from other side. 6. Remove four mounting bolts of steering rack and pinion assembly from Steering Gear Mounting Panel 7. Take out steering rack and pinion assembly from either side of steering knuckle. REFITMENT: For assembly follow reverse procedure of removal. NOTE There is a poka-yoke provided at steering pinion to lower and upper universal joint (UJ) mounting.