ALTROZ SERVICE MANUAL

STEERING - MANDO 14 NOTE:  Refitment of universal joint between intermediate shaft and rack & pinion assembly use new bolt for tightening.  Wheel alignment is necessary after installation (Refer wheel alignment procedure). WARNING Do not reuse the universal joint bolts. 7.4 ECU REMOVAL NOTE: Refer EPAS ECU replacement & software updation procedure in filed. Electric Power Assisted Steering (EPAS) ECU replacement and software update procedure in field. 1. Disconnect battery. (Refer battery removal procedure/Body Electrical group). 2. Remove two screws and one nut of cover nacelle. 3. Remove lower panel covers attached to the dashboard. NOTE: For detailed illustration, please refer to the Body section of Gasoline Workshop Manual. 4. Disconnect the electrical connector’s from the ECU. 5. Remove the mounting bolts of ECU. Tightening torque -1.8 - 2.2 6. Take out the ECU.