ALTROZ SERVICE MANUAL

STEERING - MANDO 12 11. Hold the Steering column with the hook (5123 5890 2403) to avoid to fall down & damage of steering column & injury to operator. Image for Illustration only 12.Remove the 2 mounting Hex flange screws. WARNING Hold the steering column to aviod sudden fall of the steering column that can cause injury to operator. 13. Remove the mounting screw of upper universal joint. 14.Disengage the steering column assembly from the upper universal joint and take out the steering column. WARNING  Never lift steering column by holding servo unit.  Never lift steering column by holding tilt lever.  Never keep steering column resting on servo unit.  Handle with care while transport/movement.  Do not use the steering column if dropped.  Always disconnect the battery while replacing column/servo unit.  The steering column shall be replaced in service in case of damage in a vehicle accident.  The steering column shall not be repaired in any means.  Universal joint screw to be replaced whenever in service. It is for one time use only. REFITMENT: 1. Check the column assembly for the collapse stroke ok position. (refer the Attached image')