ALTROZ SERVICE MANUAL

SUSPENSION 31 9.5 REMOVAL AND ASSEMBLY OF SUBFRAME ASSEMBLY REMOVAL 1. Remove the front wheel. 2. Disconnect the steering tie rod ball joint from the knuckle. 3. Disconnect the steering (Refer steering section). 4. Remove the C mount of the engine from the Subframe. 5. Remove Exhaust Front Pipe assembly. 6. Loosen the Subframe bolts and lower the assembly (Subframe, antiroll bar, steering rack, lower arm). 7. Remove the mountings on steering rack assembly from subframe. 8. Remove the anti roll bar from Subframe. 9. Remove the lower arm assembly. NOTE: Bolt to be tighten in Pre-loading condition. ASSEMBLY Follow the Reverse Procedure of removal of subframe assembly.