ALTROZ SERVICE MANUAL

CLUTCH_PETROL 19 NOTE: Do not mix clutch mounting bolts with other fasteners. Do not use longer or shorter screws. Longer screws may not tighten the clutch at all. Shorter screws will not provide enough threads to achieve desired tightening.  While tightening the clutch mounting screws check aligning mandrel for continuous free sliding to ensure concentric installation of clutch disc which will avoid trouble during the installation of the transaxle. D. FLYWHEEL The single mass flywheel (SMF) is a flywheel having single inertia mass. It is fitted on the engine crankshaft and provides mounting for the clutch assembly, comprising of clutch cover assembly and the driven disc. The function of a conventional flywheel is to dampen the speed fluctuations caused by impulses during the engine cycle. FLYWHEEL REMOVAL 1. Disconnect battery connection. 2. Remove splash guard from the vehicle. 3. Remove the starter motor (For procedure refer Electrical section.) 4. Lower the gearbox from the vehicle. (For procedure refer gearbox removal in Gearbox section.) 5. Remove the clutch disc with clutch cover assembly. (For procedure refer clutch cover assembly removal procedure in this section.) 6. Loosen and remove mounting bolts and separate the flywheel assembly from the engine. FITMENT For fitment, follow reverse procedure of removal.