ALTROZ SERVICE MANUAL

1.5L REVOTORQ ENGINE 66 6. ENGINE SYSTEMS A. AIR INTAKE SYSTEM Air Intake System Schematic Layout Description Air is drawn into the combustion chamber through the air intake system as shown in above schematic layout. The air intake system should have the ability to supply sufficient quantity of air to the engine. The Air is driven to intake manifold primary due to the suction created by the Engine. The Fresh air from atmosphere is made to pass through an Air Filter and into the WGT (Turbocharger). Here air is compressed by WGT which is driven by Exhaust gases. It then passes through the intercooler where it made to dissipate the heat gained by compression and passing through WGT which is located on the exhaust manifold. From here it is drawn into the in- take manifold and into the engine. WGT limits exhaust gas inflow to less than its max- imum capacity to prevent overload in advance. Because this technology provides an engine with high durability and better economic efficiency. The Air intake System consists of the following components. 1. Air Filter. 2. Intake Manifold 3. Intercooler. 4. Air Mass Flow Sensor 5. Snorkel Assembly 6. Throttle Valve 7. Air Temperature Sensor