ALTROZ SERVICE MANUAL

1.2L REVOTRON ENGINE 146 9. Insert the hollow dowels (8 no.s) into the crankcase. 10. Assemble the lower bearing shell to the on the bedplate. (Apply the coat of engine oil.) 11. Apply the sealant to the crankcase as shown in below image. 12. Assemble the bed plate in given sequence with 100% of the final torque & angle (50Nm ± 5 Nm with 120° ± 15°). NOTE  Bolts to be oiled at threads and seating surface.  Do not Reuse the bed plate mounting bolts. A. Tighten to 50Nm ± 5 Nm (5kgfm ± 0.5 kgfm) as mentioned below. B. Turn the bolt 120° ± 15° in sequence as mentioned below. 13. Alternately all screws to be machine tightened simultaneously in each step. 14. Tighten the outer mounting bolts of the bed plate in sequence as shown below.