ALTROZ SERVICE MANUAL

BODY 20 2.8 FRONT BUMPER REMOVAL 1. Open the bonnet. 2. Remove the 2 Nos. of Mounting screws M8. 3. Remove 4 clip buttons from the bumper skin. 4. Loosen and remove the mounting screws along with the washers from the bottom side of the bumper. 5. Loosen and remove two mounting screws of the outer liner from the inner side of wheel arch. Follow the same procedure at the other end also. 6. Pull out the front bumper from wheel arch end. 7. Disconnect fog lamp connectors and remove the bumper. FITMENT For fitment follow the reverse procedure of removal.