ALTROZ SERVICE MANUAL

BODY 6 5. Operate the bonnet opening lever from inside and ensure that the bonnet pops up properly, if not loosen the mounting bolts and move the lock in the oval slots provided in the mounting holes, so that it opens properly. 6. Apply the recommended grease to the sliding plates and cable.  BONNET LATCH RELEASE CABLE REMOVAL 1. Open the bonnet. 2. Pull out the cable from the lock assembly. 3. Loosen and remove mounting fasteners of hood release lever and remove the lever. 4. Remove locking pin 5. Disconnect the cable from hood release lever. 6. Pull out and remove the cable from the engine compartment. CAUTION Do not pull the hood latch cable from inside of cab it can damage the rubber grommet. FITMENT NOTE Check the condition of the rubber grommet, if found damaged replace the same at the time of fitment. For fitment follow the reverse procedure of removal.