HARRIER_SAFARI FESTIVE EDITION

HARRIER_SAFARI FESTIVE EDITION 7 FITMENT 1. Locate the new WPC ECU assembly on bracket the help of 4 snap locking. 2. Fix the new WPC ECU assembly on bracket the 2 screws with tightening torque 2.5 Nm. NOTE:  Maintain the trim and ECU surface flushness of 0.5mm.  The distance between upper housing & axis of positive mounting hole should be 16.5mm.  The distance between fan duct cover & axis of positive mounting hole should be 13mm. 3. Connect back the wiring harness connector to the WPC ECU connector. 4. Ensure that harness connector for the WPC ECU connector is fitted tightly with applicable torque mentioned on the component drawing. 5. Place back the anti-skid mat on surface of the mounted WPC ECU. NOTE: Anti-skid mat shall be properly fitted and no waviness shall observe on anti-skid mat. 6. Assemble back the trim panel back.