TIAGO PREMIUM

TIAGO_TIGOR PREMIUM 19 6. Remove tailgate trim. (For procedure Refer Tailgate Trim removal process.) 7. Disconnect wiper motor connector. 8. Loosen and remove three wiper motor fastener to remove wiper motor. FITMENT For fitment follow reverse procedure of removal. I. WIPER AND WIPER CARE 1. Wiper blade attack angle on wind shield glass should be 90º i.e. perpendicular. Remove wiper blade and rest wiper arm on wind shield glass in the centre position. Check the gap between arm strip and glass. Adjust by twisting wiper arm. 2. Straighten the secondary lever & yoke, if found twisted. Slide the flexer inside the rubber, if found protruding out and crimp the claw to avoid it from coming out again. 3. Check the wiper blades at least twice a year or when they seem less effective. Substances such as tree sap and some hot wax treatments used by commercial car washes reduce the effectiveness of wiper blades. 4. If the wiper blades do not wipe properly, clean both the windshield and wiper blades using undiluted windshield wiper solution or a mild detergent. Rinse thoroughly with clean water. To avoid damaging the blades, do not use fuel, kerosene, paint thinner, or other solvents. 5. When replacing wiper blade assemblies, always use specified parts or equivalents. To make replacing the wipers easy, turn the ignition to ACC, and then turn the wipers on. When the wiper reaches the vertical position, turn the ignition to lock.