TIAGO TIGOR CNG - SERVICE MANUAL

SUPPLEMENTARY RESTRAINT SYSTEM (SRS) 23 1. TOP SIDE CONNECTOR PINOUT DETAILS TRACK FUNCTION – VE Air Bag + VE Air Bag 1 Infotainment switch 2 Infotainment Ground 3 Cruise Switch 4 Cruise Ground 5 Horn Switch (+Ve) 6 Horn Switch (-Ve) ON VEHICLE REPAIR REMOVAL: 1. Disconnect the battery and wait for 2 minutes. 2. Remove the DAB. (For procedure, refer DAB removal) 3. Remove the steering wheel. (For procedures refer steering wheel removal in steering section). 4. Loosen three fixing screws of lower assembly of nacelle and upper assembly of the nacelle, located at bottom side of the assembly nacelle lower. 5. Dismantle both nacelle from snap fitting and take out the both assembly nacelle. 6. Remove four mounting screws of clock spring and take out the clock spring. FITMENT: CAUTION Care should be taken that before fitment of clock spring, make sure that the steering wheel and the vehicle is in straight ahead position. For fitment follow the reverse procedure of removal. NOTE: After fitment of clock spring on Combi switch align the clock spring as follows: