TIAGO TIGOR CNG - SERVICE MANUAL

BODY 29 4.15. REAR DOOR REMOVAL 1. Remove the “B” pillar trim. (For procedure refer “B” pillar trim removal process.) 2. Remove electrical connection of door wiring harness. 3. Remove the check strap. NOTE Before fitting the check strap apply grease on it. Grease type (Maker, Type): KLUBER, POLYLUB 801. Regreasing interval: 6 Months or 10,000km within. 4. Open the front door, support the rear door from below and remove four mounting bolt from door side. 5. Slowly pull out the door and pull out the wiring harness carefully which was disconnected earlier. FITMENT For fitment follow the reverse procedure of removal.