TIAGO TIGOR CNG - SERVICE MANUAL

BODY 16 10.Remove the glove box. (For procedure follow the steps as mentioned in dash board skin removal). 11. Remove PAB Assembly (If applicable). (For procedure follow the steps as mentioned in dash board skin removal). 12. Remove solar load sensor. (if applicable) (For procedure follow the steps as mentioned in HVAC section). 13. Remove the Dashboard skin. (For procedure follow the steps as mentioned in dash board skin removal). 14. Remove the PDC unit on the CCB. (For procedure follow the steps as mentioned in Electrical Section). 15. Remove the Cabin fuse and relay unit. (For procedure follow the steps as mentioned in Electrical Section). 16. Remove the window winding module. (For procedure follow the steps as mentioned in Electrical Section). 17.Remove the wiring harness fitted on CCB. 4.4. GLOVE BOX REMOVAL 1. Open the glove box and pry out AC adaptor top Utility Bin. 2. Remove glow box damper pin. 3. Rotate glow box assembly with 50  in downward direction and pull out from hinges. 4. Remove the glow box assembly along with damper from the dashboard. FITMENT For fitment press the glove box assembly against the dashboard.