TIAGO TIGOR CNG - SERVICE MANUAL

BODY 12 26.Remove two ground connections near fuse box. 27.Disengage 3 locators located on BIW plenum panel brackets. 28.Disengage the Cross car beam (CCB) side mounting bracket from Cross car beam CCB locating pin. 29.Remove the dashboard, while removing Dashboard carefully disengage HVAC system behind the glove box. FITMENT For fitment follow reverse procedure of the removal.  Without Cross Car Beam (CCB) 1. Remove steering wheel with Driver air bag (If applicable) (For procedure refer steering wheel removal process in steering section.) 2. Pull out Driver lower panel. 3. Remove nacelle Assembly. (For removal refer steering column removal process in steering section.) 4. Remove combination switch assembly and ignition switch assembly (For procedure refers combination switch and ignition switch removal process in Electrical section.) 5. Pull out instrument cluster hood. 6. Remove instrument cluster. (For procedure refer instrument cluster removal process in Electrical section.) 7. Pry out gap hider fitted on the dashboard sub assembly.