TIAGO TIGOR CNG - SERVICE MANUAL

BRAKES 43 vi. ASSEMBLY OF CARRIER 1. Hold carrier in the holding device firmly. Note : Image for Illustration purpose only. 2. Assemble the new pad spring the carrier on both leading side and trailing side. 3. Assemble the new carrier assembly to the knuckle. Apply recommended torque. Ensure correct fitment. 4. Carefully assemble the inner and outer pad assemblies respectively and ensure the free to and fro movements of pads.(Refer PAD Assembly Procedure) 5. Reinstall the caliper to the carrier. (Refer Caliper assembly procedure) 6. Fix the wheel. vii. REMOVAL OF FRONT BRAKE DISC 1. Position the vehicle on two post lift and remove front wheel/s by removing wheel mounting nuts. 2. Remove two bolts of brake caliper assembly. 3. Release caliper assembly and tie aside to clear off from brake disc. CAUTION: Do not allow caliper to hang on brake hose as it may damage the hose. 4. Remove brake disc screws securing brake disc to the hub. 5. Pull off the brake disc.