TIAGO TIGOR CNG - SERVICE MANUAL

WHEELS AND TYRES 21 WHEEL COVER (HYPERSTYLE VARIANT) Hyper style cover is not required to remove regularly. If required to remove, follow the below procedure at service center only. 1. Insert the tool as shown. NOTE a. Insert the tool in GREEN circled area. b. Do not insert the special tool in RED circled area, locking webs may damage due to this insertion. 2. Make a gap around the cover by tool & then removed by hand. 3. When installing the cover, make sure that it is positioned so that it does not cover the air filling valve. Apply equal pressure at the circumference of the wheel cover to fix it in the wheel rim TIAGO XM, TIGOR XM & XZ 1. Remove Wheel cover (if applicable). Insert a piece of cloth between the spokes of the wheel cover and pull it outwards. Take out detached wheel cover from the wheel rim. Image for illustration purpose only 2. Loosen wheel bolts by approximately 180 deg (half a rotation). 3. Lift the vehicle using two post lift. 4. Remove bolts and then wheel. Wheel bolts must be tightened in sequence as shown in Fig and to proper torque to avoid bending wheel or brake disc. FITMENT For fitment follow the reverse procedure.