TIAGO TIGOR CNG - SERVICE MANUAL

SUSPENSION 43 ASSEMBLY: NOTE: Check the condition of the components before assembly and replace if found damage. 1. Insert the spring pad on damper spring seat & ensure proper fitment. NOTE: Ensure proper fitment of rubber seat with metal spring seat. 2. Compress the spring with spring compression tool part No.2702 5890 3202 to reduce length as done during disassembly. 3. Insert compression spring on damper. (Ensure that spring to be butt with spring pad vertical wall) 4. Insert Bump stopper on piston rod. 5. Assemble dust cover in the spring. (Ensure dust cover is properly located in spring). 6. Insert special fastener on piston rod and tighten it to 2 kg-m torque to ensure the location. 7. Ensure top mount M10 bolt heads should be placed in the rubber sleeve slots. Assemble top mount with rubber sleeve separately. 8. Ensure the orientation of bottom eye axis with top mount stud axis to 90º. 9. Fit Nyloc Flange nut and tighten to 6-7 Kg-m torque. Hold the piston rod by spanner/tool (A/F: 6 mm) to stop piston rod rotation during tightening of nut. 10.Remove spring compression tool carefully.