TIAGO TIGOR CNG - SERVICE MANUAL

SUSPENSION 34 INSTALLATION: 1. Proceed in the reverse order of fitment. 2. Replace rubber bushes, worn damaged parts. 3. Tighten the rear mounting bracket bolts with required Torque in ECIE/preload condition. 4. Insert the lower link ballpin in to knuckle and tighten Mtg. with required torque. 5. Insert the tie member and tighten the nuts. 6. Tighten the RH side Vertical member. NOTE : Ensure the position & orientation of the Clamp of the vertical member. 7. Ensure that heat shield is assembled properly on ball joint. 8. Ensure torqueing to be done at ECIE/ Preload condition.