TIAGO TIGOR CNG - SERVICE MANUAL

1.2L REVOTRON Bi FUEL CNG ENGINE 94 Fire Fighting Measures Specific hazards: Hazardous combustion products may include: carbon monoxide, oxides of nitrogen, oxides of sulphur, unburnt hydrocarbons. As vapour is heavier than air, spreads along the ground and distant ignitions possible. Extinguishing media: Shut off supply. If not possible and there is no risk to surroundings, let the fire burn itself out. Large fires should only be fought by properly trained fire fighters. Dry powder, carbon dioxide may be used for small fires. Water fog should be used to assist the approach to the source of the fire. Unsuitable extinguishing media: Water in a jet. Use of halon extinguishers should be avoided for environmental reasons. Other information: Keep adjacent containers cool by spraying with water. All storage areas should be provided with adequate firefighting facilities. Large storage should be equipped with purpose designed water sprays. Accidental Release Measures Personal precautions: vapour can travel along the ground for considerable distances. Remove all possible sources of ignition in the surrounding area and evacuate all personnel. Shut off leaks, if possible without personal risk. Do not enter confined spaces. Ventilate contaminated area thoroughly. Do not breathe vapour. Avoid contact with skin, eyes and clothing. Take off all contaminated clothing immediately - but do not attempt to do so if clothing is adhering to the skin. Contaminated clothing may be a fire hazard and therefore should be soaked with water before being removed. Personal protection: Wear: mono goggles, chrome leather, neoprene or nitrile rubber glove, safety shoes or boots. Environmental precautions: No specific measures. Clean-up methods – small -Spillage: Allow to evaporate. Do not disperse liquid using water. Clean-up methods – large spillage: Attempt to disperse the vapour or to direct its flow to a safe location, for example by using water fog sprays. Otherwise treat as for small spillage. Other information: Test atmosphere for vapours to ensure safe working conditions before personnel are allowed into the area. Local authorities should be advised if significant spillages cannot be contained. Observe all relevant local regulations. Product Transfer Electrostatic charges may be generated during pumping. Ensure electrical continuity by bonding all equipment. Avoid contact with equipment in view of the risk of cold burns. Do not use compressed air for filling, discharging or handling. NOTE This information is based on our current knowledge and is intended to describe the CNG for the purposes of health, safety and environmental requirements only. It should not be construed as guaranteeing any specific property of the CNG.