TATA PUNCH-SERVICE MANUAL

ELECTRICAL 136 Guideline: RVC without Ultrasonic Park Assist" To be update with & cross check on vehicle Guideline: RVC with Ultrasonic Park Assist" To be update with & cross check on vehicle WARNINGS 1. The camera uses fish eye lens. So the size of the objects or distance from the objects that appear in the display may differ from the actual distances and size. 2. In low light conditions, the screen may darken or image may become faint. 3. If the tire sizes are changed, the position of the fixed guidelines displayed on the screen may change. 4. Do not apply any kind of force on the camera. 5. During rainy or snowy conditions, image may get obscured. So in this condition, do not depend on park aid system. 6. The camera used in the vehicle, may not reproduce the same color of the real object. 7. The rear view camera does not display objects that are close to or below the bumper, underneath the vehicle, or objects out of the camera’s field of view. The area displayed on the screen may vary according to vehicle orientation or road conditions. 8. In case of damage of the rear portion of the vehicle, camera position may change. Which causes wrong visual information on display. In case of damage, make sure that, camera fitted properly at the intended location. 9. In case of uneven road conditions or up –hill or downhill conditions, do not depend on rear view camera park aid. 10.High humidity and variation in ambient temperature may result into condensation inside the camera lens, which may further result into degradation of camera video feed on the screen. It is recommended that not to rely on camera video feed for parking assistance in such scenario. This phenomenon is temporary and will be automatically recovered with reduction in humidity and less variation in ambient temperature. USING CAMERA 1. Do not detach, disassemble or modify in any manner from the actual position. This will show in correct visual information in display. 2. Do not use camera when tailgate is open. If tailgate is open, visual information may not be the actual rear view of the vehicle & system will warn with message 'Tail Gate Open, Please close. 3. Do not attach any advertisement or styling or any kind of stickers on top of camera. If this happens, camera cannot provide you the visual image. 4. Do not add any accessory, which will obstruct camera field of view. CLEANING CAMERA 1. Due to environmental reasons, dust, mud or fog may accumulate on the camera lens. So regularly clean the camera lens. 2. Use water to clean the camera lens. Do not use extreme cold extreme hot water. Rapid changes in temperature may brittle the camera lens. 3. Wipe the camera lens with soft cloth. 4. Do not use hard cloth or material to wipe the camera lens. This will cause scratches on the camera, and leads to deteriorated visual image on the display. 5. Do not apply organic solvent, car wax, window cleaner or glass coat to clean the camera. If this is applied, wipe it off as soon as possible. 6. Do not apply heavy force on lens, while cleaning. 7. Do not remove mud, snow on the camera lens using stick or hard material.