TATA PUNCH-SERVICE MANUAL

ELECTRICAL 128 c. If the system is affected by any surrounding ultrasonic noise. If you see above screens, park assist is malfunctioning due to external conditions. Please rectify as specified on the screen. Reverse park assist limitations Reverse Park Assist system is not a collision avoiding system. lt is solely the driver‘s responsibility to park the vehicle safely. Reverse Park Assist feature works on ultra sound echo technology, due to which performance is not guaranteed in following scenarios:  If the object has a sharp edge surface, where surface may divert echoes from sensor reception.  If object is mesh fence made up of thin wires, where echoes can't be given by the surface.  Fast moving objects passes in the sensor field of detection, where echoes are not processed by the system.  If object is made/covered by foam or sponge or snow where ultrasonic sound signals are absorbed.  Objects close to the rear bumper can go undetected by the Reverse Park Assist field of detection. Driver should use extreme caution while parking the vehicle. WARNING Due to any reason, if the sensor gets misaligned or loses its intended fitment position, contact your dealer for refitment. NOTE Turning the ignition ‘OFF’ ‘while the Park assist feature in running would disable the feature. Reverse park assist system preventive maintenance 1. Regularly clean the sensors and keep them free from dust, ice, mud, water, chewing gum etc. for proper working of the system. Use a smooth cloth for cleaning. 2. Do not use water at high pressure for cleaning the sensor or camera. 3. Do not cover the sensor surface with any additional fitment. This will interrupt park assist performance. 4. Don’t apply external colors, styling stickers, chewing gums, or any material, which will stick on the sensors. This will degrade park assist performance. 5. Don’t put any object like spare tyres or footrest or number plate, which will cover the sensor and obstruct its field of detection Vehicle parking Park the vehicle in a safe place. Switch on the indicator signal before turning to park. Apply the parking brake. Ensure that all window glasses are closed and all lamps are turned ‘OFF’. At night, put on the parking lights if required. Remove the key from the ignition switch and lock the vehicle. Block the wheel if parked on a slope. NOTE  When parking on a downhill gradient, place the gear lever in ‘Reverse’ position. While parking on uphill gradient, place the gear lever in the ‘1st’ position.  Do not use parking brake for braking unless unavoidable circumstances like when service brake is not working properly. The braking distance is considerably longer and the wheels could lock. There is an increased danger of skidding and accidents. WARNING Never leave children unsupervised in the parked vehicle. They could also operate the vehicle's equipment. There is a risk of an accident and injury.