TATA PUNCH-SERVICE MANUAL

ELECTRICAL 65 K. DOOR HANDLE SWITCH REMOVAL 1. Disconnect the battery. 2. Remove the Door Handle. (Refer Door Handle Removal Procedure in the Body Section). 3. Unscrew the door handle cover with dedicated screw panel. 4. Remove door handle switch wire harness fitted in the handle. 5. Remove Screw on Door Handle Switch. 6. Remove the door handle switch with wire harness. 7. Similarly follow the above steps for other door handle switches on the door. REFITMENT For fitment follow the procedure in reverse. NOTE 1. Ensure that door handle switch connector is fitted tightly and properly. 2. After replacing the door handle switch, check vehicle locking/ unlocking state changes by pressing the replaced door handle switch. 3. The smart key shall be present during door handle switch press. 4. Connect the Diagnostics tool and clear the DTCs.