TATA PUNCH-SERVICE MANUAL

ELECTRICAL 47 REMOVAL OFCOMBI SWITCH: 1. Disconnect battery negative terminal. 2. Remove steering nacelle. (Refer Removal procedure for steering nacelle) 3. Remove steering wheel. (Refer Removal procedure for steering wheel) 4. Disconnect combi switch connection. 5. Remove Clock Spring by removing screws & loosen the combi switch clamp screw. 6. Remove combi switch block from steering column. TORQUE VALUE TABLE Component Tightening torque value Combination switch Clamp screw 3 to 5 Nm Clock spring 1.2 Nm Light Stalk 0.3 to 0.4 Nm Wipe Stalk 0.3 to 0.4 Nm REFITMENT 1. Ref it combination swi tch block properly on steering column. 2. Refit combination switch block mtg. Clip. 3. Refit Clock Spring. 4. Reconnect combination switch connection. 5. Refit steering wheel. 6. Refit Steering nacelle. 7. Refit Battery negative terminal.