TATA PUNCH-SERVICE MANUAL

ELECTRICAL 29 6. Disconnect the electrical connection on tail lamp. 7. Pull the Lamp Outside (-Y Axis) Disengaging From Trim Clip from LH & RH sides. 8. Pull the lamp at catcher points to release from BIW & take lamp out from vehicle. 9. Rotate the turn signal bulb holder in anti-clock wise direction to unlock the bulb holder from lamp. 10.Remove the bulb holder from lamp. 11. Remove/replace the bulb. 12. Rotate the bulb holder in clockwise to lock the bulb holder on lamp. FITMENT For Fitment, Follow the reverse procedure of Removal. D. ROOF LAMP PINOUT DETAILS PIN DESCRIPTION 1 -ve or Ground 2 Door Signal 3 +ve or Supply REMOVAL 1. Gently pry out the middle roof lamp assembly from the bezel roof lamp by inserting wedge. 2. Disconnect the electrical connector form the assembly. FITMENT: For Fitment, Follow the reverse procedure of Removal.