TATA PUNCH-SERVICE MANUAL

BODY 19 7. Remove the Hex FL Mounting bolts & Clips on Bumper Assembly. 8. Remove Mud Flap on both sides. 9. Remove four Hex FL mounting bolts along with the washers & screws from the bottom side of the bumper. 10.Loosen and remove two mounting screws of the outer liner from the inner side of wheel arch. Follow the same procedure at the other end also. 11.Pull out Fender wheel arch. 12.Remove FL screw on both sides. 13.Pull out the front bumper from wheel arch end. 14.Disconnect fog lamp connectors and remove the bumper. FITMENT For fitment follow the reverse procedure of removal.