TATA PUNCH-SERVICE MANUAL

SUSPENSION 5 2. TECHNICAL SPECIFICATIONS (A) Front Suspension Type: Independent, lower wishbone, McPherson strut type with anti roll bar at front. (B) Rear Suspension Type: Semi Independent, twist beam Axle with coil spring and shock absorbers. (C) Steering geometry (In unladen condition for both Petrol version) FRONT REAR Caster 4.1º ± 45' - Camber (per wheel) -30' ± 30' -52' ± 30' Toe In (per wheel) 0' to 13' -3' + 27' Toe Out - - Camber angle deviation (Between LH & RH) 20' 20' Toe angle deviation (Between LH & RH) - 13' NOTE: 1. Front camber & front toe are adjustable. Adjust wheel geometry values close to nominal of given specification. 2. Front Castor is not adjustable 3. Rear camber & toe are not adjustable.