TIGOR EV_ZIPTRON_SERVICE MANUAL

HV ELECTRICAL SYSTEM 51 6. Loosen and remove the boll joint bolt of lower arm both LH & RH side. 7. Apply brake and remove drive shaft lock nut on both LH and RH side. 8. Drain the TCS coolant and Remove the pump (Refer Coolant draining & Pump proceduer for removal process). 9. Remove drive shaft by pulling disk brake and Take out drive shaft LH / RH from gearbox. (Drain oil before carrying out this process). 10. Loosen and Remove the mounting screw and take out the motor cover. 11. Remove the connector and cable of motor controller connected to PDU. 12. Disconnection the wiring harness of motor.