TIGOR EV_ZIPTRON_SERVICE MANUAL

SUSPENSION 48 11. Detach the hand brake cable from the lever on the trailing shoe by moving the lever towards the center of the brake and removing the cable nipple from its location in the end of the lever. 12. Remove the hand brake cable holder lock pin from the back plate 13. Remove the mounting bolt of hand brake cable on the twist beam axle 14. Disconnect the brake lines mounting on the twist beam. 15. Remove the stub axle and back plate along with brake shoe assembly. NOTE: Apply adhesive thread locker HS TS: 25408 on anchor plate mounting bolts (thread locker code no: 56506 00256 2) for fitment. 16. Remove the shock absorber lower bolts (Refer removal and refitment of shock absorber). 17. Loosen and remove the twist beam bracket bolts on both sides.