TIGOR EV_ZIPTRON_SERVICE MANUAL

SUSPENSION 35  INSTALLATION: 1. Proceed in the reverse order of fitment. 2. Replace rubber bushes, worn damaged parts. 3. Tighten the rear mounting bracket bolts with proper torque. 4. Insert the lower link ballpin in to knuckle and tighten the nut. 5. Insert the tie member and tighten the nuts. 6. Tighten the Vertical member. NOTE : Ensure the position & orientation of the Clamp of the vertical member. 7. Ensure that heat shield is assembled properly on ball joint. 8. Ensure torqueing to be done at ECIE/ Preload condition.