TIGOR EV_ZIPTRON_SERVICE MANUAL

LV ELECTRICAL SYSTEM 90 11. IGNITION KEY A. IGNITION REMOTE KEY (If Applicable) An E-Key is an electronic access and authorization system which is provided as a standard feature on your vehicle. Vehicle is provided with two E-Keys. Each Key is specific to the immobilizer of vehicle. FUNCTIONAL DETAILS 1. Unlock 2. Approach light/ Tailgate opening ( To open tailgate press, follow-me button on remote for 2sec) 3. Lock 4. Folding Key In / Out Unlocking principle: The transponder which is built into the ignition E- Key carries a unique identification code. The vehicle unlocks when the code on the E-Key matches with the code on the Engine Management system (VCU). Engine Starting: When the key is inserted and the ignition is switched ON, all codes are communicated within concerned components (E-Key, Immobilizer and VCU). The engine will start only if all the codes match. KEY SPECIFICATION  Operating temperature range (with battery): - 10C to +60C.  Operating temperature range (without battery- external power supply): -40 C to +85 C.  Storage temperature range (without battery): - 40C to +85C.  Remote operating voltage range: 2.53 to 3.2V.  LED Blinking: Normal condition - 20ms blink, Low battery - 5blinks@10Hz after button release  Force required opening Battery Cover from RKE: Min. 30 N.  Remote power @ 3 meter from Antenna: - 12dBm.  Carrier frequency with deviation: 433.92 MHz +- 75 KHz. EXPLODED VIEW REMOTE KEY COMPONENTS TABLE SR.NO. DISCRIPTION 1 Upper Housing 2 Lower Housing 3 Button Cover 4 Key Ring 5 Turn Bearing 6 Push Button 7 Spring 8 Battery(CR 2032) 9 Battery Cover 10 Emblem 11 PCBA