TIGOR EV

BODY 24 2.10 FRONT DOOR TRIMS REMOVAL 1. Open the Door. 2. Remove the ORVM cheater assembly. (For removal refer ORVM removal process). 3. Insert wedge pin and remove window-winding switch from door pull outer. 4. Disconnect the window winding connection and remove the bezel along with the switch. 5. Pull out door pull outer. 6. Remove all screws of the door pull inner and take it out. 7. Disconnect the pop up knob link by rotating it in anticlockwise direction from the clip on the door shell. 8. Remove door trim screw, which is located at the bottom of door. 9. Insert plastic wedge pin and remove the door trim. FITMENT For fitment follow the reverse procedure of removal. NOTE While lifting door trim, care should be taken such that tree clips don’t get damage. Below image gives the location of tree clips on door trim.