TIGOR EV

BRAKES 37 9. Loosen and Remove Upper and Lower mountings on Bracket Assembly from Firewall Panel RHD.(Brake and brake control mountings). 10.Pull out the brake mounting bracket along with brake pedal and brake pedal from the driver’s foot control area. INSTALLATION 1. Hold the brake control bracket on firewall. 2. Tighten the brake mounting bracket nut specified sequence & torque (2.0 - 2.5 Kg-m). 3. Match clevis hole to the pedal lever hole and insert clevis pin into the hole. 4. Insert split pin in to the hole of clevis pin and split the end of split pin. NOTE:  Not to add carpet over the basic carpet in the pedal region.  Basic carpet should be held firmly in the pedal region.