TIGOR EV

HV ELECTRICAL 29 4. INSTRUCTION FOR WORKING ON HV COMPONENTS ON VEHICLE: 1. Turn off the vehicle Ignition. 2. Open the bonnet of the vehicle. 3. Press service disconnect switch for turn the EV (Electric Vehicle) system off. 4. Remove Aux Battery negative terminal and Put masking tape on Aux Battery negative terminal & cable. 5. Wait for 10 Min after press service disconnect switch for turn the EV (Electric Vehicle) system off for working on vehicle. 6. Press service disconnect switch and Lockout tagout of vehicle is recommended Press service disconnect switch and Lockout tagout of vehicle procedure must be followed in/during the below mentioned conditions,